Finger Grips
Bulk Electrical Cable
Wiring Devices
Wiring Devices for 250 Volt 3 phase
European Wiring Devices
Shrink Tubing
Molded "Y"s, 3 Conductor
Molded "Y"s, 4 Conductor w/Ground Fault
Molded "Y"s, 3 Conductor w/o Ground Fault
Extension Cords
Extension Cords for 250 volt 3 phase
Duo-Meter
Duo-Meter for 250 volt 3 Phase
Clamp-on Floodlight
15 % Boosters for 250 volt 3 phase
Voltage Booster, 3 Wire
Voltage Booster, 4 Wire
Voltage Booster, 110volt System
Power Supply Transformers
Step-Down Transformer
Step-Down Transformer for 3phase
Voltage X 2
Multi-Step Bucking Transformer
Motor Control Center for Hoists
"Eddy" Hook-Ups
 
4 Conductor to 3 Conductor Extra Long “Y”s without Ground Fault
 
“Y”s without Ground Fault
Our extra long “Y”s have a 4 conductor male wiring device. The female wiring devices on the long legs are 250v for motors. The devices on the short legs are 15amp 125volt UG for plugging in the worker’s tools.

These extra long “Y”s come in four styles.
Blunt- The extra long legs have no wiring devices attached. They are blunt. The two short legs are equipped with 15 amp 125 volt U-Ground connectors and boots.

20amp- All devices and boots are attached. Male wiring device is 20amp 125/250v L14-20P and female devices are L6-20C. The boots are attached in the regular way;i.e. Male boot on the plug and female boots on the connectors.

30amp to 20amp- All devices are attached. Male wiring device is 30amp 125/250v L14-30P and female devices are L6-20C. The boots are attached in the regular way; i.e. Males boots on the plug and female boots on the connectors.

30amp- All devices are attached. Male wiring device is 30 amp 125/250v L14-30P and female devices are 30amp 250v L6-30C. All boots are male. The connectors are drilled to accept a rejection pin.

Blunt
20amp
30amp to 20amp
30amp
Description “A” “A” “B” “C”
Wire Size
Cat No
Cat No
Cat No
Cat No
32ft “Y” 16’ x 16’ x 3’x3’
32ft “Y” 17’ x 17’ x 3’x3’
32ft “Y” 18’ x 18’ x 3’x3’
32ft “Y” 19’ x 19’ x 3’x3’
32ft “Y” 20’ x 20’ x 3’x3’
32ft “Y” 25’ x 25’ x 3’x3’
10/4 to 10/3
10/4 to 10/3
10/4 to 10/3
10/4 to 10/3
10/4 to 10/3
10/4 to 10/3
42080
42081
42083
42084
42085
42086
42260
42261
42262
42263
42264
42265
42266
42267
42268
42269
42270
42271
42272
42273
42274
42275
42276
42277
 
Adapters
 
These special adapters are for the purpose of adapting a 250volt system fo ruse with 125 volt Motors and source of power. Adapters do not change the voltage; the system must be plugged into a 125volt source to get 125volt for the 125volt motors. The advantage of the adapters is that it allows use of your standard yoke and extension cord inventory for those few times that you need 125volt only.
 
Cat No
Wiring Devices
Description
22000
22001
30 amp 250v Male 15 amp 125v Female
15 amp 125v Male 30 amp 250v Female
Allows 125 volt motors to be used with standard yokes
Allows standard extension cords to plug into 125volt source